5 Commits

Author	SHA1	Message	Date
Unity Technologies	07f206ff9e	com.unity.netcode.gameobjects@1.8.0 ... The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html). Additional documentation and release notes are available at [Multiplayer Documentation](https://docs-multiplayer.unity3d.com). ## [1.8.0] - 2023-12-12 ### Added - Added a new RPC attribute, which is simply `Rpc`. (#2762) - This is a generic attribute that can perform the functions of both Server and Client RPCs, as well as enabling client-to-client RPCs. Includes several default targets: `Server`, `NotServer`, `Owner`, `NotOwner`, `Me`, `NotMe`, `ClientsAndHost`, and `Everyone`. Runtime overrides are available for any of these targets, as well as for sending to a specific ID or groups of IDs. - This attribute also includes the ability to defer RPCs that are sent to the local process to the start of the next frame instead of executing them immediately, treating them as if they had gone across the network. The default behavior is to execute immediately. - This attribute effectively replaces `ServerRpc` and `ClientRpc`. `ServerRpc` and `ClientRpc` remain in their existing forms for backward compatibility, but `Rpc` will be the recommended and most supported option. - Added `NetworkManager.OnConnectionEvent` as a unified connection event callback to notify clients and servers of all client connections and disconnections within the session (#2762) - Added `NetworkManager.ServerIsHost` and `NetworkBehaviour.ServerIsHost` to allow a client to tell if it is connected to a host or to a dedicated server (#2762) - Added `SceneEventProgress.SceneManagementNotEnabled` return status to be returned when a `NetworkSceneManager` method is invoked and scene management is not enabled. (#2735) - Added `SceneEventProgress.ServerOnlyAction` return status to be returned when a `NetworkSceneManager` method is invoked by a client. (#2735) - Added `NetworkObject.InstantiateAndSpawn` and `NetworkSpawnManager.InstantiateAndSpawn` methods to simplify prefab spawning by assuring that the prefab is valid and applies any override prior to instantiating the `GameObject` and spawning the `NetworkObject` instance. (#2710) ### Fixed - Fixed issue where a client disconnected by a server-host would not receive a local notification. (#2789) - Fixed issue where a server-host could shutdown during a relay connection but periodically the transport disconnect message sent to any connected clients could be dropped. (#2789) - Fixed issue where a host could disconnect its local client but remain running as a server. (#2789) - Fixed issue where `OnClientDisconnectedCallback` was not being invoked under certain conditions. (#2789) - Fixed issue where `OnClientDisconnectedCallback` was always returning 0 as the client identifier. (#2789) - Fixed issue where if a host or server shutdown while a client owned NetworkObjects (other than the player) it would throw an exception. (#2789) - Fixed issue where setting values on a `NetworkVariable` or `NetworkList` within `OnNetworkDespawn` during a shutdown sequence would throw an exception. (#2789) - Fixed issue where a teleport state could potentially be overridden by a previous unreliable delta state. (#2777) - Fixed issue where `NetworkTransform` was using the `NetworkManager.ServerTime.Tick` as opposed to `NetworkManager.NetworkTickSystem.ServerTime.Tick` during the authoritative side's tick update where it performed a delta state check. (#2777) - Fixed issue where a parented in-scene placed NetworkObject would be destroyed upon a client or server exiting a network session but not unloading the original scene in which the NetworkObject was placed. (#2737) - Fixed issue where during client synchronization and scene loading, when client synchronization or the scene loading mode are set to `LoadSceneMode.Single`, a `CreateObjectMessage` could be received, processed, and the resultant spawned `NetworkObject` could be instantiated in the client's currently active scene that could, towards the end of the client synchronization or loading process, be unloaded and cause the newly created `NetworkObject` to be destroyed (and throw and exception). (#2735) - Fixed issue where a `NetworkTransform` instance with interpolation enabled would result in wide visual motion gaps (stuttering) under above normal latency conditions and a 1-5% or higher packet are drop rate. (#2713) - Fixed issue where you could not have multiple source network prefab overrides targeting the same network prefab as their override. (#2710) ### Changed - Changed the server or host shutdown so it will now perform a "soft shutdown" when `NetworkManager.Shutdown` is invoked. This will send a disconnect notification to all connected clients and the server-host will wait for all connected clients to disconnect or timeout after a 5 second period before completing the shutdown process. (#2789) - Changed `OnClientDisconnectedCallback` will now return the assigned client identifier on the local client side if the client was approved and assigned one prior to being disconnected. (#2789) - Changed `NetworkTransform.SetState` (and related methods) now are cumulative during a fractional tick period and sent on the next pending tick. (#2777) - `NetworkManager.ConnectedClientsIds` is now accessible on the client side and will contain the list of all clients in the session, including the host client if the server is operating in host mode (#2762) - Changed `NetworkSceneManager` to return a `SceneEventProgress` status and not throw exceptions for methods invoked when scene management is disabled and when a client attempts to access a `NetworkSceneManager` method by a client. (#2735) - Changed `NetworkTransform` authoritative instance tick registration so a single `NetworkTransform` specific tick event update will update all authoritative instances to improve perofmance. (#2713) - Changed `NetworkPrefabs.OverrideToNetworkPrefab` dictionary is no longer used/populated due to it ending up being related to a regression bug and not allowing more than one override to be assigned to a network prefab asset. (#2710) - Changed in-scene placed `NetworkObject`s now store their source network prefab asset's `GlobalObjectIdHash` internally that is used, when scene management is disabled, by clients to spawn the correct prefab even if the `NetworkPrefab` entry has an override. This does not impact dynamically spawning the same prefab which will yield the override on both host and client. (#2710) - Changed in-scene placed `NetworkObject`s no longer require a `NetworkPrefab` entry with `GlobalObjectIdHash` override in order for clients to properly synchronize. (#2710) - Changed in-scene placed `NetworkObject`s now set their `IsSceneObject` value when generating their `GlobalObjectIdHash` value. (#2710) - Changed the default `NetworkConfig.SpawnTimeout` value from 1.0s to 10.0s. (#2710)	2023-12-12 00:00:00 +00:00
Unity Technologies	b5abc3ff7c	com.unity.netcode.gameobjects@1.4.0 ... The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html). Additional documentation and release notes are available at [Multiplayer Documentation](https://docs-multiplayer.unity3d.com). ## [1.4.0] - 2023-04-10 ### Added - Added a way to access the GlobalObjectIdHash via PrefabIdHash for use in the Connection Approval Callback. (#2437) - Added `OnServerStarted` and `OnServerStopped` events that will trigger only on the server (or host player) to notify that the server just started or is no longer active (#2420) - Added `OnClientStarted` and `OnClientStopped` events that will trigger only on the client (or host player) to notify that the client just started or is no longer active (#2420) - Added `NetworkTransform.UseHalfFloatPrecision` property that, when enabled, will use half float values for position, rotation, and scale. This yields a 50% bandwidth savings a the cost of precision. (#2388) - Added `NetworkTransform.UseQuaternionSynchronization` property that, when enabled, will synchronize the entire quaternion. (#2388) - Added `NetworkTransform.UseQuaternionCompression` property that, when enabled, will use a smallest three implementation reducing a full quaternion synchronization update to the size of an unsigned integer. (#2388) - Added `NetworkTransform.SlerpPosition` property that, when enabled along with interpolation being enabled, will interpolate using `Vector3.Slerp`. (#2388) - Added `BufferedLinearInterpolatorVector3` that replaces the float version, is now used by `NetworkTransform`, and provides the ability to enable or disable `Slerp`. (#2388) - Added `HalfVector3` used for scale when half float precision is enabled. (#2388) - Added `HalfVector4` used for rotation when half float precision and quaternion synchronization is enabled. (#2388) - Added `HalfVector3DeltaPosition` used for position when half float precision is enabled. This handles loss in position precision by updating only the delta position as opposed to the full position. (#2388) - Added `NetworkTransform.GetSpaceRelativePosition` and `NetworkTransform.GetSpaceRelativeRotation` helper methods to return the proper values depending upon whether local or world space. (#2388) - Added `NetworkTransform.OnAuthorityPushTransformState` virtual method that is invoked just prior to sending the `NetworkTransformState` to non-authoritative instances. This provides users with the ability to obtain more precise delta values for prediction related calculations. (#2388) - Added `NetworkTransform.OnNetworkTransformStateUpdated` virtual method that is invoked just after the authoritative `NetworkTransformState` is applied. This provides users with the ability to obtain more precise delta values for prediction related calculations. (#2388) - Added `NetworkTransform.OnInitialize`virtual method that is invoked after the `NetworkTransform` has been initialized or re-initialized when ownership changes. This provides for a way to make adjustments when `NetworkTransform` is initialized (i.e. resetting client prediction etc) (#2388) - Added `NetworkObject.SynchronizeTransform` property (default is true) that provides users with another way to help with bandwidth optimizations where, when set to false, the `NetworkObject`'s associated transform will not be included when spawning and/or synchronizing late joining players. (#2388) - Added `NetworkSceneManager.ActiveSceneSynchronizationEnabled` property, disabled by default, that enables client synchronization of server-side active scene changes. (#2383) - Added `NetworkObject.ActiveSceneSynchronization`, disabled by default, that will automatically migrate a `NetworkObject` to a newly assigned active scene. (#2383) - Added `NetworkObject.SceneMigrationSynchronization`, enabled by default, that will synchronize client(s) when a `NetworkObject` is migrated into a new scene on the server side via `SceneManager.MoveGameObjectToScene`. (#2383) ### Changed - Made sure the `CheckObjectVisibility` delegate is checked and applied, upon `NetworkShow` attempt. Found while supporting (#2454), although this is not a fix for this (already fixed) issue. (#2463) - Changed `NetworkTransform` authority handles delta checks on each new network tick and no longer consumes processing cycles checking for deltas for all frames in-between ticks. (#2388) - Changed the `NetworkTransformState` structure is now public and now has public methods that provide access to key properties of the `NetworkTransformState` structure. (#2388) - Changed `NetworkTransform` interpolation adjusts its interpolation "ticks ago" to be 2 ticks latent if it is owner authoritative and the instance is not the server or 1 tick latent if the instance is the server and/or is server authoritative. (#2388) - Updated `NetworkSceneManager` to migrate dynamically spawned `NetworkObject`s with `DestroyWithScene` set to false into the active scene if their current scene is unloaded. (#2383) - Updated the server to synchronize its local `NetworkSceneManager.ClientSynchronizationMode` during the initial client synchronization. (#2383) ### Fixed - Fixed issue where during client synchronization the synchronizing client could receive a ObjectSceneChanged message before the client-side NetworkObject instance had been instantiated and spawned. (#2502) - Fixed issue where `NetworkAnimator` was building client RPC parameters to exclude the host from sending itself messages but was not including it in the ClientRpc parameters. (#2492) - Fixed issue where `NetworkAnimator` was not properly detecting and synchronizing cross fade initiated transitions. (#2481) - Fixed issue where `NetworkAnimator` was not properly synchronizing animation state updates. (#2481) - Fixed float NetworkVariables not being rendered properly in the inspector of NetworkObjects. (#2441) - Fixed an issue where Named Message Handlers could remove themselves causing an exception when the metrics tried to access the name of the message.(#2426) - Fixed registry of public `NetworkVariable`s in derived `NetworkBehaviour`s (#2423) - Fixed issue where runtime association of `Animator` properties to `AnimationCurve`s would cause `NetworkAnimator` to attempt to update those changes. (#2416) - Fixed issue where `NetworkAnimator` would not check if its associated `Animator` was valid during serialization and would spam exceptions in the editor console. (#2416) - Fixed issue with a child's rotation rolling over when interpolation is enabled on a `NetworkTransform`. Now using half precision or full quaternion synchronization will always update all axis. (#2388) - Fixed issue where `NetworkTransform` was not setting the teleport flag when the `NetworkTransform.InLocalSpace` value changed. This issue only impacted `NetworkTransform` when interpolation was enabled. (#2388) - Fixed issue when the `NetworkSceneManager.ClientSynchronizationMode` is `LoadSceneMode.Additive` and the server changes the currently active scene prior to a client connecting then upon a client connecting and being synchronized the NetworkSceneManager would clear its internal ScenePlacedObjects list that could already be populated. (#2383) - Fixed issue where a client would load duplicate scenes of already preloaded scenes during the initial client synchronization and `NetworkSceneManager.ClientSynchronizationMode` was set to `LoadSceneMode.Additive`. (#2383)	2023-04-10 00:00:00 +00:00
Unity Technologies	8060718e04	com.unity.netcode.gameobjects@1.3.1 ... The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html). Additional documentation and release notes are available at [Multiplayer Documentation](https://docs-multiplayer.unity3d.com). ## [1.3.1] - 2023-03-27 ### Added - Added detection and graceful handling of corrupt packets for additional safety. (#2419) ### Changed - The UTP component UI has been updated to be more user-friendly for new users by adding a simple toggle to switch between local-only (127.0.0.1) and remote (0.0.0.0) binding modes, using the toggle "Allow Remote Connections" (#2408) - Updated `UnityTransport` dependency on `com.unity.transport` to 1.3.3. (#2450) - `NetworkShow()` of `NetworkObject`s are delayed until the end of the frame to ensure consistency of delta-driven variables like `NetworkList`. - Dirty `NetworkObject` are reset at end-of-frame and not at serialization time. - `NetworkHide()` of an object that was just `NetworkShow()`n produces a warning, as remote clients will _not_ get a spawn/despawn pair. - Renamed the NetworkTransform.SetState parameter `shouldGhostsInterpolate` to `teleportDisabled` for better clarity of what that parameter does. (#2228) - Network prefabs are now stored in a ScriptableObject that can be shared between NetworkManagers, and have been exposed for public access. By default, a Default Prefabs List is created that contains all NetworkObject prefabs in the project, and new NetworkManagers will default to using that unless that option is turned off in the Netcode for GameObjects settings. Existing NetworkManagers will maintain their existing lists, which can be migrated to the new format via a button in their inspector. (#2322) ### Fixed - Fixed issue where changes to a layer's weight would not synchronize unless a state transition was occurring.(#2399) - Fixed issue where `NetworkManager.LocalClientId` was returning the `NetworkTransport.ServerClientId` as opposed to the `NetworkManager.m_LocalClientId`. (#2398) - Fixed issue where a dynamically spawned `NetworkObject` parented under an in-scene placed `NetworkObject` would have its `InScenePlaced` value changed to `true`. This would result in a soft synchronization error for late joining clients. (#2396) - Fixed a UTP test that was failing when you install Unity Transport package 2.0.0 or newer. (#2347) - Fixed issue where `NetcodeSettingsProvider` would throw an exception in Unity 2020.3.x versions. (#2345) - Fixed server side issue where, depending upon component ordering, some NetworkBehaviour components might not have their OnNetworkDespawn method invoked if the client side disconnected. (#2323) - Fixed a case where data corruption could occur when using UnityTransport when reaching a certain level of send throughput. (#2332) - Fixed an issue in `UnityTransport` where an exception would be thrown if starting a Relay host/server on WebGL. This exception should only be thrown if using direct connections (where WebGL can't act as a host/server). (#2321) - Fixed `NetworkAnimator` issue where it was not checking for `AnimatorStateTtansition.destinationStateMachine` and any possible sub-states defined within it. (#2309) - Fixed `NetworkAnimator` issue where the host client was receiving the ClientRpc animation updates when the host was the owner.(#2309) - Fixed `NetworkAnimator` issue with using pooled objects and when specific properties are cleaned during despawn and destroy.(#2309) - Fixed issue where `NetworkAnimator` was checking for animation changes when the associated `NetworkObject` was not spawned.(#2309) - Corrected an issue with the documentation for BufferSerializer (#2401)	2023-03-27 00:00:00 +00:00
Unity Technologies	5b4aaa8b59	com.unity.netcode.gameobjects@1.0.0-pre.6 ... The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html). Additional documentation and release notes are available at [Multiplayer Documentation](https://docs-multiplayer.unity3d.com). ## [1.0.0-pre.6] - 2022-03-02 ### Added - NetworkAnimator now properly synchrhonizes all animation layers as well as runtime-adjusted weighting between them (#1765) - Added first set of tests for NetworkAnimator - parameter syncing, trigger set / reset, override network animator (#1735) ### Changed ### Fixed - Fixed an issue where sometimes the first client to connect to the server could see messages from the server as coming from itself. (#1683) - Fixed an issue where clients seemed to be able to send messages to ClientId 1, but these messages would actually still go to the server (id 0) instead of that client. (#1683) - Improved clarity of error messaging when a client attempts to send a message to a destination other than the server, which isn't allowed. (#1683) - Disallowed async keyword in RPCs (#1681) - Fixed an issue where Alpha release versions of Unity (version 2022.2.0a5 and later) will not compile due to the UNet Transport no longer existing (#1678) - Fixed messages larger than 64k being written with incorrectly truncated message size in header (#1686) (credit: @kaen) - Fixed overloading RPC methods causing collisions and failing on IL2CPP targets. (#1694) - Fixed spawn flow to propagate `IsSceneObject` down to children NetworkObjects, decouple implicit relationship between object spawning & `IsSceneObject` flag (#1685) - Fixed error when serializing ConnectionApprovalMessage with scene management disabled when one or more objects is hidden via the CheckObjectVisibility delegate (#1720) - Fixed CheckObjectVisibility delegate not being properly invoked for connecting clients when Scene Management is enabled. (#1680) - Fixed NetworkList to properly call INetworkSerializable's NetworkSerialize() method (#1682) - Fixed NetworkVariables containing more than 1300 bytes of data (such as large NetworkLists) no longer cause an OverflowException (the limit on data size is now whatever limit the chosen transport imposes on fragmented NetworkDelivery mechanisms) (#1725) - Fixed ServerRpcParams and ClientRpcParams must be the last parameter of an RPC in order to function properly. Added a compile-time check to ensure this is the case and trigger an error if they're placed elsewhere (#1721) - Fixed FastBufferReader being created with a length of 1 if provided an input of length 0 (#1724) - Fixed The NetworkConfig's checksum hash includes the NetworkTick so that clients with a different tickrate than the server are identified and not allowed to connect (#1728) - Fixed OwnedObjects not being properly modified when using ChangeOwnership (#1731) - Improved performance in NetworkAnimator (#1735) - Removed the "always sync" network animator (aka "autosend") parameters (#1746)	2022-03-02 00:00:00 +00:00
Unity Technologies	36d07fad5e	com.unity.netcode.gameobjects@1.0.0-pre.4 ... The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html). Additional documentation and release notes are available at [Multiplayer Documentation](https://docs-multiplayer.unity3d.com). ## [1.0.0-pre.4] - 2021-01-04 ### Added - Added `com.unity.modules.physics` and `com.unity.modules.physics2d` package dependencies (#1565) ### Removed - Removed `com.unity.modules.ai` package dependency (#1565) - Removed `FixedQueue`, `StreamExtensions`, `TypeExtensions` (#1398) ### Fixed - Fixed in-scene NetworkObjects that are moved into the DDOL scene not getting restored to their original active state (enabled/disabled) after a full scene transition (#1354) - Fixed invalid IL code being generated when using `this` instead of `this ref` for the FastBufferReader/FastBufferWriter parameter of an extension method. (#1393) - Fixed an issue where if you are running as a server (not host) the LoadEventCompleted and UnloadEventCompleted events would fire early by the NetworkSceneManager (#1379) - Fixed a runtime error when sending an array of an INetworkSerializable type that's implemented as a struct (#1402) - NetworkConfig will no longer throw an OverflowException in GetConfig() when ForceSamePrefabs is enabled and the number of prefabs causes the config blob size to exceed 1300 bytes. (#1385) - Fixed NetworkVariable not calling NetworkSerialize on INetworkSerializable types (#1383) - Fixed NullReferenceException on ImportReferences call in NetworkBehaviourILPP (#1434) - Fixed NetworkObjects not being despawned before they are destroyed during shutdown for client, host, and server instances. (#1390) - Fixed KeyNotFound exception when removing ownership of a newly spawned NetworkObject that is already owned by the server. (#1500) - Fixed NetworkManager.LocalClient not being set when starting as a host. (#1511) - Fixed a few memory leak cases when shutting down NetworkManager during Incoming Message Queue processing. (#1323) ### Changed - The SDK no longer limits message size to 64k. (The transport may still impose its own limits, but the SDK no longer does.) (#1384) - Updated com.unity.collections to 1.1.0 (#1451)	2021-01-04 00:00:00 +00:00